Typical Properties of Medium Density Closed Cell Silicone Sponge

Description: Medium density closed cell silicone sponge material designed to be utilized in gasket applications that require a soft compressible material. This material is UV and ozone resistant and takes a low compression set. Medium density closed cell silicone sponge offers resistance to low and high temperatures and provides users with a service temperature of -103°F to +450°F. Medium density closed cell silicone sponge is formulated to meet the physical requirements of AMS3195, MIL-R-46089, ASTM D1056, MIL-R-6130, and MIL-STD 670 TE12.

M&P Sealing’s closed cell silicone sponge gasket material is available in a wide range of densities from soft to extra-firm with varying densities and formulations available in between. Medium density closed cell silicone sponge can be converted into rolls ranging from 1/4″ wide up to 36″ in width. Available in many colors, the surface of has a fine fabric finish on both sides and can be manufactured in rolls or sheet with a thickness range from as thin as 1/32″, to as thick as 2″. M&P Sealing has the ability to supply medium density closed cell silicone sponge without adhesive or choose from either our standard acrylic adhesive or our high-temperature acrylic adhesive. Send in a drawing, and let M&P Sealing die-cut or waterjet cut medium density closed cell silicone sponge to meet your prototype and production requirements.

Specifications

AMS3195
ASTM D1056
MIL-R-46089
MIL-STD 670 TE12
MIL-R-6130

Physical Property Test Method Limits Unit of Measure Typical Values
COMPRESSION DEFLECTION ASTM D 1056 10 +/- 4 psi 11
DENSITY
(Under 1/4″ Thick)
(Over 1/4″ Thick)		 ASTM D 1056 .025 Max.
.020 Max.		 pci .020
.018
THERMAL CONDUCTIVITY ASTM F 433 N/A in/hr/ft2/°F .75
WATER ABSORPTION* ASTM D 1056 * 5% Max. % 5
COMPRESSION SET
(22 HRS. AT 212°F)		 ASTM D 395 60% Max. % 29
ELONGATION ASTM D 412 N/A % 200
TENSILE STRENGTH ASTM D 412 N/A psi 100
DIELECTRIC STRENGTH (APPROX.) N/A N/A Volts/mil 150
BRITTLE POINT ASTM D 746 -67°F
-55°C		 °F
°C		 -103°F
-75°C
LOW-TEMPERATURE ASTM D 573 N/A °F
°C		 -103°F
-75°C
HIGH-TEMPERATURE ASTM D 573 N/A °F
°C		 450°F
232°C
 *Note – Test samples prepared have skin on all sides in accordance with ASTM D3183, as allowed per ASTM D1056
This information is furnished as a guide for selecting materials. M&P Sealing Inc. disclaims liability for results or use of this information. It is the customer’s responsibility to obtain and test samples when determining the suitability of material for a particular application.

Also see: